Regular maintenance and cleaning of motocross boots is essential for their longevity and optimal performance. With proper care, the boots will retain their protective properties, look better, and accompany you through numerous rides. Below is a detailed step-by-step guide on how to care for your motocross boots.
Boots maintenance
Step 1: preparation
- First, unfasten all fasteners except the top one. This way you can thoroughly clean the shoes while maintaining a good sealing edge at the top. To prevent water from entering the interior during washing, we recommend placing your hand inside the shoe while cleaning.
- Unfasten the clips.
- Wash boots with clean water
Step 2: Rinsing with water
Most easily remove the majority of mud and dirt using a high-pressure cleaner. If you don't have one, you can also use a hose with a high-pressure nozzle.
Always keep your hand inside the boot during this to prevent water from entering it. Remember to wash all sides, including the sole.
Step 3: Wash, brush and rinse
Spread the milk on the entire shoes, paying special attention to cleaning all hidden parts, such as buckles and soles. Use a quality brush and scrub each part of the shoe well. When finished, rinse them again to remove all soap and mud residue.
Helpful tip: We recommend a brush with medium-stiff bristles and a cleaner such as Mr. Clean with Febreze added.
Step 4: Drying
Proper drying is crucial for the long lifespan of boots. If you have the opportunity, use an air compressor to remove water and dirt, especially around buckles and hinges. Then wipe the boots with a clean cloth, particularly around the shin plates and buckles. The drier the boots, the longer they will last.
Step 5: Tightening and Inspection
Check all clasps and screws to ensure they are properly tightened. Open each clasp, check if it is loose, and tighten if necessary. Then close all clasps again.
Note: If your boots have hinges (e.g. Fox Instinct or Motion), it is essential that you regularly check the hinge bolts. If you remove a bolt, always apply Blue Loctite when reinstalling it.
Helpful tip: Fox Racing boots use a 3 mm hex key for the buckles and a 4 mm hex key for the hinge screws.
Step 6: Review of Contact Surfaces
Step 6: Review of Contact SurfacesThe most heavily loaded parts of boots are the rubber protective inserts and the sole. Regularly check the grip and make sure the rubber is not separating where it rubs against the engine. It is also recommended that you inspect the sole every time you wash. If you notice holes or damage, this is a sign that it is time for replacement or re-gluing of the sole.
Conclusion
With regular cleaning, proper drying, and inspection, you will ensure that your motocross boots remain in excellent condition. Such care will not only extend their lifespan, but will also provide you with greater safety and comfort while riding. In summary – clean boots are happy boots, and happy boots mean a better experience for every motocross enthusiast.
